Home Page

BrowningHELICAL GEARING PRODUCTS

The Broadest Helical Gearing Line Available Today

  • Ouput torque ranging from 100 to 11 million inch-pounds
  • The right product to meet your application challenge
  • In addition to standard series, extensive custom enclosed gearing solutions available
Experience the Browning Gearing Shaft Mount Advantage:
  • Patented TorqTaper® Plus mounting system allows ease of installation and removal
  • Patented Barrier seal system provides protection in the most extreme applications
  • Tapered roller bearings on all shafts for maximum thrust capacity
  • Commercially available bearings and seals make maintenance trouble-free
  • Carburized and ground gearing provides higher rating capacity in less space
Helical Shaft Mount Reducers
  • Sizes 107-608.
  • 3/4" through 10" shaft sizes
  • Ratios 5:1, 9:1, 15:1, 25:1 and 35:1
  • Up to 1,000,000 In. Lbs. torque
  • TorqTaper® Plus bushed or finished bore
  • Field installable back stop

    TorqTaper® Plus is a Registered Trademark of Emerson Electric Co.
Screw Conveyor Drives
  • 1 1/2" to 3 7/16" Drive Shafts, 2 hole or 3 hole, plain carbon & stainless steel
  • Integral or modular drive shaft assembly from stock components
  • Ratios 5:1, 9:1, 15:1, 25:1 and 35:1
  • Up to 114,000 In. Lbs. of Torque
Parallel Shaft, Right Angle & Hollow Bore Speed Reducers
Parallel Shaft Speed Reducer
  • Output torque range from 16,000in.-lbs. to 11,000,000 in.-lbs. in 25 frame sizes
  • Ratio range from single 1:1 to quadruple 657:1
  • Available with solid or hollow output shaft in parallel or right angle configuration
  • BROWNING standard 2-year warranty
Right-Angle Gearboxes
Right Angle Gearbox
  • Ratings to 135HP
  • 1:1 TO 2:1 Ratios
  • 6 sizes
  • Aluminum right angle (ARA) also available with ratings to 7.8 horsepower

 
Shaftmount Speed Reducers
  • Shaft Mounted Speed Reducer
  • High Efficiency
  • Output Torque up to 55,000 in. lbs
  • Available nominal ratios of 5:1, 15:1 and 25:1
  • 7 AGMA sizes: 107 - 315
  • Multi-position torque arm assembly
  • Excellent reversibility
Screw Conveyor Drives
  • All Drives Meet CEMA Standards
  • Oversized tapered roller bearings for high thrust load capacity
  • Thrust Load Capacity up to 11,240 lbs.
  • 7 AGMA sizes: 107 through 315
  • Output Torque up to 55,000 in. lbs.
  • Available nominal ratios of 5:1, 15:1 and 25:1
  • A wide range of CEMA Drive Shafts are available